Filter cartridges Which membrane is suitable for which application? Filter cartridges are used to filter liquids, air and gases. Choosing the right membrane depends on the characteristics of the process. PTFE, PES, PVDF and nylon each have their own properties and applications, from sterile air and gas filtration to the filtration of pharmaceutical liquids and solvents. Discover the differences, the applications across various industries and the key considerations, such as flow rate, operating pressure, temperature, chemical resistance and integrity testing.Filter cartridges: which membrane should you choose?
The membrane inside your filter cartridge determines what it is suitable for: air and gas, liquids or solvents. In this blog, you’ll learn which membranes are available, when to choose a filter cartridge or a capsule filter, and what to consider when making your choice.
What is a filter cartridge?
A filter cartridge is a filter element that is fitted into a filter housing. Filter cartridges are used in larger process systems, where high flow rates and a large filtration area are required. They are suitable for continuous use and fit standard filter housings.
At the heart of every filter cartridge is the membrane. Each membrane material has its own properties, and therefore its own applications.
Membranes at a glance
There is no single best membrane: the right choice depends on your process.
|
Membrane |
Properties |
Typical applications |
|
PTFE |
Water-repellent (hydrophobic), broad chemical resistance |
Steriele lucht- en gasfiltratie, tankventilatie, fermentatie, oplosmiddelen |
|
PES |
Suitable for liquids |
Pharmaceutical liquids, food and beverage liquids, high-purity water |
|
PVDF |
Chemically resistant, low extractables |
High-purity liquids, applications where chemical resistance matters |
|
Nylon |
Suitable for certain solvents |
Solvents, analytical and laboratory filtration |
PTFE is widely used for sterile air and gas filtration, whereas PES is suitable for pharmaceutical liquids and ultrapure water. The properties of the membrane determine which application it suits best.
Why PTFE for air filtration?
PTFE repels water. Air and gas pass through the membrane, while water is kept out under normal conditions. This is why PTFE is widely used for air filters on storage tanks and process vessels: they need to exchange air during filling and emptying, without contamination entering from outside.
Filter cartridge or capsule filter?
Most membranes are available both as a filter cartridge and as a capsule filter, in comparable sizes. The difference lies in multi-use versus single-use.
|
|
Filter cartridge |
Capsule filter |
|
Housing |
Stainless steel filter housing |
Plastic housing |
|
Use |
Multi-use: you reuse the filter housing and replace the cartridge |
Single-use: you replace the entire capsule |
Which format suits best varies by customer and by process. In many industries, stainless steel filter housings with filter cartridges have been the standard for years. In pharma, on the other hand, there has been an increasing shift towards single-use, for reasons of safety and speed. Neither is better than the other: both have their own advantages.
For sterile applications with steam sterilisation in place, there is also an SIP capsule, such as the BorsoCap-SIP. Read more about the BorsoCap-SIP here.
Quality you can rely on
Fully traceable
Certified
Recognised standards
Cleanroom production
Personal advice Our sterile filters meet the highest standards
down to every component
supplied with quality certificates
incl. USP Class VI and EC 1935/2004
manufactured in a cleanroom
our account managers are happy to support you
How to choose the right filter cartridge
Start with your process data, not with a product name. These factors determine which filter cartridge is the right fit:
- Gas or liquid
- Flow rate
- Operating pressure
- Temperature
- Sterilisation method
- Chemical resistance
- Filter cartridge or capsule
- Validation and integrity testing requirements
Integrity tests show that a membrane filter performs within the expected limits before or after use. In critical pharmaceutical applications and sterile gas filtration, this is often a key part of the filtration strategy.
Our filter cartridges and capsule filters
Below you’ll find the filters we supply for each application. View our full range of filter cartridges.
|
Application |
Products |
|
Particle filtration |
Pleated filters, capsule filters, PP filter, cellulose (depth filters) |
|
Air filtration |
PTFE filter, PTFE capsule filter, BorsoCap-SIP, vent filter, P-BE filter |
|
Sterile filtration |
PES filter, PES capsule filter, PVDF filter, nylon filter |
News Case Read more about the impact of excess endotoxins on the drug manufacturing process. Case Read this blog about Active Pharmaceutical Ingredients (APIs), the active substances in pharmaceutical products. Case Reliable gas filtration for compressed air and nitrogen removes oil, moisture and particles, ensuring sterile, controlled gas streams for GMP-compliant pharmaceutical and veterinary production.Explore our other blogs

Fluid for medicine not usable due to excess endotoxins
API filters in the pharmaceuticals
Filters for veterinary medicines
Learn more? Do you have questions or would you like more information? Fill in your details below, and our team will contact you shortly. We are happy to assist you further!
Contact us
A filter cartridge is fitted into a reusable filter housing, usually made of stainless steel. A capsule filter has an integrated plastic housing and is replaced entirely after use.
Membranes used for sterile filtration include PES, PVDF and PTFE. PES is widely used for liquids, whereas PTFE is suitable for sterile air and gas filtration.
A PTFE filter has a hydrophobic (water-repellent) membrane and is widely used for air and gas filtration. A PES filter has a hydrophilic membrane and is suitable for liquids, for example in the pharmaceutical industry.
